Hot spring water/bath water detection

Hot spring is a type of spring water that naturally flows out of the ground, with a spring mouth temperature significantly higher than the local annual average temperature, and contains mineral water that is beneficial for human health. There are also many areas where artificial wells are drilled, usually at a distance of 600-2000 meters. Deep water pumps are used to extract groundwater, which is rich in various beneficial minerals and the water temperature is generally above 20 degrees Celsius, also known as hot spring wells. Due to differences in climate, latitude, and elevation across regions, it is difficult to unify the lower temperature limit of hot springs. Different countries/regions have slightly different definitions and understandings of hot springs: in the hot spring law of Taiwan, China, the definition of hot springs is hot spring water and steam (including gases dissolved in hot spring water) that meet the hot spring standards. Hot spring water includes natural or artificially extracted warm water, cold water, and water vapor (including gases dissolved in hot spring water), measured at a temperature above or equal to 30 ℃ on the surface; If the temperature of spring water is below 30 ℃ and its water quality meets the composition standards of hot spring water, it is also considered a hot spring. According to the Japanese hot spring law, warm water, mineral water, water vapor, and other gases (excluding natural gas composed mainly of hydrocarbons) are emitted from the underground. Temperature: Above or equal to 25 ℃; If the temperature of a hot spring is below 25 ℃, the water quality meets the requirements of more than one of the 19 substances listed in the Japanese Hot Spring Law. According to the Korean Hot Springs Law, hot springs refer to hot springs that spring out of the ground with a temperature higher than or equal to 25 ℃, and the water quality components are harmless to the human body. Chinese medical mineral expert Chen Yanbing believes in his book "Mineral Springs and Healing" that hot springs generally contain multiple active trace elements with a certain degree of mineralization, and the temperature of the spring water is often above 30 ℃. Warm mineral springs can have medical effects on the following diseases: obesity, motor system diseases (such as trauma, chronic rheumatoid arthritis, etc.), neurological diseases (such as nerve damage, neuritis, etc.), early mild cardiovascular diseases, gout, skin diseases, etc

Function of testing report:

1. Project bidding: Issue authoritative third-party CMA/CNAS qualification report

2. Online e-commerce platform entry: Quality inspection report recognized by major e-commerce platforms

3. Used as a sales report: issuing legally effective testing reports to make consumers more confident

4. Papers and research: Provide professional personalized testing needs

5. Judicial services: providing scientific, fair, and accurate testing data

6. Industrial problem diagnosis: Verify the troubleshooting and correction of industrial production problems

BAIJIAN testing process:

1. Telephone communication and confirmation of requirements

2. Recommend solutions and confirm quotations

3. Mail samples and arrange testing

4. Progress tracking and result feedback

5. Provide reports and after-sales service

6. If urgent or priority processing is required

Our Competitive Edge:

1. The testing industry is fully covered, meeting different testing needs

2. Fully cover the laboratory and allocate localized testing nearby

3. Engineers provide one-on-one services to make testing more accurate

4. Free initial testing, with no testing fees charged

5. Self service order delivery for free on-site sampling

6. Short cycle, low cost, and attentive service

7. Possess authoritative qualifications such as CMA, CNAS, CAL, etc

8. The testing report is authoritative and effective, and is generally used in China